Generally, powerful LCD splicing screen manufacturers will know whether customers need to provide door-to-door installation service when customers consult LCD splicing screen, and then provide customers with corresponding splicing display scheme according to their needs. If the customer does not need the manufacturer's technology to provide on-site installation service, the LCD splicing screen manufacturer technology will also remotely guide the customer how to install and operate.
Therefore, for users, we must know some common sense about the installation of LCD splicing screen. Otherwise, we will easily encounter some problems when installing LCD splicing screen. So let's take a look at the LCD splicing screen in the installation of what matters need to pay attention to it.
LCD splicing screen installation site
First of all, let's talk about the installation method of LCD splicing screen. If you have known about the LCD splicing screen, you will more or less have some simple understanding of the installation method of LCD splicing screen. The common installation methods of LCD splicing screen in the market include wall mounted, embedded, floor cabinet type, floor bracket type, arc installation, etc.
Wall mounted installation is to directly hang the LCD splicing screen on the wall, which requires that the wall must be a solid wall, which can bear the load. Otherwise, it is easy to cause losses to customers. Embedded installation is to embed the LCD splicing screen into the wall, and the wall needs to be processed before installation. Embedded installation is the best installation method for user experience.
Cabinet type installation is floor type installation, which can be moved for a short distance after successful installation. Arc installation is a kind of installation method that breaks through the conventional horizontal width and vertical installation, and its installation effect is finally displayed in the form of curved surface. However, this installation method needs to be communicated with the manufacturer in advance, and the manufacturer needs to make preparations when producing LCD splicing screen.
Users need to consider their own site and LCD splicing screen application mode, according to the needs of reasonable selection of installation mode. When installing LCD splicing screen, we should do some preparatory work first, and check the equipment to be installed. A complete set of LCD splicing screen should include:
5 rows and 6 columns LCD splicing screen combination
LCD splicing unit: that is, LCD splicing screen unit, mainly used to display images, video, size and model, users should make appropriate selection according to their own needs.
The bracket for fixing the splicing unit: it is generally provided by the manufacturer together with the splicing unit.
Splicing processor: most LCD splicing screens now have built-in processors.
Video cable: choose high quality cable to avoid splash screen and noise.
In general, the number of input and output channels in a video splitter is greater than one.
Power supply: the overall power of splicing panel system is relatively large, and stable power supply must be provided.
Computer: used to install large screen control software. The software is provided by splicing screen manufacturer.
After a simple understanding of the above content, we will not be so confused about the installation of LCD splicing screen. However, we advise you that professional things should be done by professional people. Therefore, if you want to install LCD splicing screen by yourself, it is better to seek professional guidance from LCD splicing screen manufacturers to avoid failure in the later stage Loss.
Recommended content: What are the installation methods of LCD splicing screen?
Same as wechat service hotline (1369224 hours)
This article is published by Shenzhen Weikang horizon editor. Please specify the source of Reprint: http://tianxinqi.com