大连附近想过夜电话联系

Welcome to the official website of Weikang vision (Shenzhen) Technology Co., Ltd!

LCD panel manufacturer for 15 years

Selected in government procurement list of energy saving products for many years

National Service Hotline
400-6677-885
136-7006-5922 (same as wechat)
News and information
Recommended products
contact us
National hotline

136-7006-5922

  • Wellcome International Group
  • Address:

    Building 2, No.144 Wan'an Road, Shajing street, Bao'an District, Shenzhen

Brand information
Your current position: home page >> News and information >> common problem

Common faults and solutions of LCD splicing screen

Browse: Time of publication: June 4, 2020

Sometimes there are some problems in the use of LCD splicing screen. Today, Weikang vision, the manufacturer of LCD splicing screen, will tell you what common fault problems will appear in the process of using LCD splicing screen, and how to solve these problems correctly after encountering these problems.
Common fault 1: LCD splicing screen screen screen will appear "clutter", "clutter" phenomenon.
Solution: the above situation may be due to the loose connection line between LCD panel and video card. As long as the connection line is firmly connected, the situation of "clutter" and "clutter" can be improved.
 A village committee in Shenzhen, guangdong.jpg
Weikang LCD splicing screen
Intermittent rule: common faults on the screen
Solution: check whether the video card is over frequency, if the video card over frequency use will often appear the above situation, at this time should appropriately reduce the overclocking amplitude, but pay attention to, first of all, to reduce the frequency of video memory.
Common fault 3: LCD splicing screen Screen appears, but the above two moves failed to take effect
Solution: LCD splicing screen after the above situation, users have to check the quality of the graphics card. Users can check the anti electromagnetic interference and electromagnetic shielding quality of the video card.
The specific method is: some parts that may produce electromagnetic interference should be installed far away from the graphics card as far as possible (such as hard disk), and then see whether the flower screen disappears. If it is determined that the electromagnetic shielding function of the graphics card is not up to standard, the display card should be replaced or the shielding cover made by ourselves. One way to solve the problem is to check whether the screen driver is compatible.
 Hubei County Public Security Bureau
LCD splicing screen for monitoring and commanding
This situation is generally easy to ignore, because the update speed of graphics card driver is faster and faster, some users always can't wait to install the latest version of the driver. In fact, some of the latest drivers are either the test version or the version optimized for a particular graphics card or game. Sometimes, the use of such drivers may lead to the appearance of fancy screens. Therefore, users should try their best to use the drivers provided by the manufacturers of graphics cards.
In case of the above problems, if the user is not sure about solving the problem, it is recommended to contact the LCD splicing screen manufacturer to solve the problem, because the LCD splicing screen has very high requirements for technical professionalism, and secondary injury must be avoided in the maintenance process.
Recommended content: Some common sense on LCD splicing screen cognition
Same as wechat service hotline (1369224 hours)
This article is published by Shenzhen Weikang horizon editor. Please specify the source of Reprint: http://tianxinqi.com

Recommendation information

QQ online consultation