LCD splicing screen is fragile and can not withstand any collision. Once there is a slight collision, it may damage the electronic components inside the product and cause irreparable loss to customers. Therefore, in the daily handling process, we must pay attention to handle with care, avoid collision and friction with hard objects, and try not to put it on the top of the LCD splicing screen Place other items to avoid pressure on the LCD splicing screen.
Weikang LCD splicing display
In addition, we should pay attention to the temperature and humidity of LCD splicing screen. In general, we will advise customers to LCD splicing screen It is installed in a ventilated environment, and we know that the use temperature of LCD splicing screen is limited. When the temperature is lower than - 30 ℃, it is recommended to suspend the use as much as possible, and try to improve the external temperature before normal use.
When cleaning the LCD splicing screen, we should pay attention not to test any alkaline solution or chemicals randomly, which will damage the "protective armor" of the LCD splicing screen itself. In addition, there are some misunderstandings when we clean the LCD splicing screen at ordinary times
First: maybe there are still many people who habitually use paper towel to clean the LCD splicing screen. Don't use it. Coarse tissue particles will only scratch the delicate screen "protective armor". Generally speaking, the oil and finger prints left in our daily life are not as easy to clean as we usually think, but if you find the right way, you can It's much easier to do. Now there is a special cleaning cloth for LCD splicing screen on the market. Use it to clean it to ensure you get twice the result with half the effort;
Weikang factory Exhibition
Second: many people may read the first item and say, "if you say you can't clean with chemicals, we'll take clean water for cleaning. Never. If you use clean water for cleaning, it's easy to flow into the screen, causing short circuit of equipment, and then burning expensive equipment. Moreover, as far as oil pollution is concerned, water can't do any cleaning work at all On the contrary, it will only make the screen more and more polished;
Third: some people may be quite right to think that alcohol is an organic solvent that can dissolve stains. If it is used occasionally, there is no problem. In fact, this is not allowed. It will also damage the "protective armor" of the screen.
If the LCD splicing screen really breaks down, try not to disassemble it by yourself. If you don't know the structure inside, it may cause damage to electronic components during the self disassembly process. It is still recommended that you contact the manufacturer for later maintenance work to reduce your own loss as much as possible.
Recommended content: What are the installation methods of LCD splicing screen?
24 hour service hotline: 13670065922 (same as wechat)
This article is published by Shenzhen Weikang horizon editor. Please specify the source of Reprint: http://tianxinqi.com